Tradim | LED dimming stabilizer | IP 20

Stable light, bulbs go out The LEDFIX001 is Tradim's new, more advanced dimming stabilizer. Not only does it fix problems better than other dimming stabilizers, it is also more economical. The LEDFIX001 is active only when needed. Led bulbs are not a real load, meaning they do not consume the entire sine wave current. Led dimmers can sometimes go haywire when the lamp is not demanding power. This can manifest itself in unstable light. The dimming stabilizer turns on the moment LED bulbs stop consuming power, so the dimmer still continuously detects a load and can continue to do its job properly. Also, the LEDFIX001 will ensure that lamps cannot stay on when the dimmer is in the off position. Difference from other stabilizers There are stabilizers on the market that generate a current spike around the 0 crossing. This prevents confusion at the dimmer by making it clear where the sine wave begins again. This results in current spikes on the grid and through the dimmer causing the dimmer to age quickly. Other stabilizers work by adding a real load. This eliminates confusion in the dimmer by loading it with a real load. The non-real part of the LED lamp comes on top of this. Because this load is on continuously, this results in energy loss where you don't want it and heat development in the installation box → The LEDFIX001 is only 18.5mm x 18.5mm x 13.5mm which makes it easy to mount in an installation box → Standby consumption: less than 0.7W at 230VAC